USAfixTM - Repair Guide (RG) - Master Email RG
- Check the hose between the solenoid and valve block
 Level of Difficulty - MEDIUM  Estimated Completion Time - 45 minutes
TASKI - FG 2C

Tools Required
Tool 
Nut driver-metric 7mm
Screwdriver-flat tip
Screwdriver-phillips

Parts Required


Step Procedure & Parts & Tools
1 TURN THE LOCKING CAP TO REMOVE IT FROM THE MACHINE. DRAIN THE TANK.

2 LAY MACHINE DOWN WITH THE BACK COVER FACING UP. REMOVE THE TANK SCREW.
Screwdriver-phillips

3 FLIP THE MACHINE OVER SO THE FRONT COVER IS FACING UP.REST THE MACHINE ON BOARDS SO THAT THE FILTER ON THE BACK DOESNT GET BROKEN.

4 REMOVE THE 4 SCREWS AND LIFT UP ON THE FRONT COVER TO REMOVE IT.
Screwdriver-phillips

5 LOCATE THE COMPRESSOR AT THE BOTTOM OF THE MACHINE.

6 HOLD THE 3 SCREWS IN PLACE WITH YOUR HAND AND TURN THE NUT DRIVER TO REMOVE THE SCREWS.
Nut driver-metric 7mm

7 LOCATE THE 2 WHITE WIRES FROM THE COMPRESSOR TO THE WHITE TERMINAL BLOCK. PULL UP ON THE WIRES TO REMOVE THEM.

8 PULL THE HOSE TO DISCONNECT IT FROM THE COMPRESSOR. REMOVE THE COMPRESSOR FROM THE MACHINE.

9 PULL THE HOSE TO DISCONNECT IT FROM THE BOTTOM OF THE TANK.

10 PULL THE HOSE TO DISCONNECT IT FROM THE TOP OF THE TANK.

11 LOCATE THE BIG HOSE THAT RUNS UNDER THE TANK TO THE VALVE BLOCK. LOOSEN THE SCREW ON THE HOSE CLAMP AND SLIDE THE HOSE CLAMP DOWN ON THE HOSE. PULL TO REMOVE THE HOSE FROM THE VALVE BLOCK.
Screwdriver-flat tip

12 LOCATE THE 2 BLACK WIRES FROM THE COMPRESSOR TO THE WHITE TERMINAL BLOCK. LOOSEN THE 2 SCREWS AND PULL THE BLACK WIRES FROM THE TERMINAL BLOCK.
Screwdriver-flat tip

13 PULL TO REMOVE THE TANK FROM THE MACHINE.

14 LOCATE THE SOLENOID VALVE AT THE BOTTOM OF THE MACHINE WHERE THE COMPRESSOR WAS. CHECK BOTTOM HOSE ON THE SOLENOID VALVE FOR CLOGS, CRACKS AND MAKE SURE HOSE CONNECTION IS SNUG.

15 FOLLOW THE HOSE FROM THE SOLENOID VALVE TO THE VALVE BLOCK. CHECK FOR CLOGS OR CRACKS. CHECK HOSE AT VALVE BLOCK FOR A SNUG CONNECTION.

16 IF HOSE IS OKAY, REVERSE STEPS 1 THRU 13 TO REASSEMBLE THE MACHINE.